These track protectors resist and cushion against cleats, shoes, and wheeled equipment, and are the solution for facilities that must ensure high-traffic sections of a track do not become worn out. An added feature is that while the protector is designed to ensure heavy objects above do not penetrate the fabric, water and liquids drain through the durable material so puddles never settle on the surface. This product is also easy to transport, set up, and move, plus is easy to clean. Customize the look and feel of the protector to match your facility and ensure a cohesive look across your venue!
Available in Standard or 3G. Made of tough polypropylene geo-textile fabric with vinyl edging with steel chain inserted all around for ballast. This keeps the protector down even in high winds without stakes. To reduce weight for easier installation, longer Sideline models have sections that join with hook-and-loop strips.
These track protectors resist and cushion against cleats, shoes, and wheeled equipment, and are the solution for facilities that must ensure high-traffic sections of a track do not become worn out.
Standard Bench Zone® Sideline Protector
- Designed to ensure heavy objects do not penetrate the fabric, while water and liquids drain through the durable material
- Easy to transport, set up, and move, plus is easy to clean
- The ‘original’ is only available in limited color options
- Black body only w/white and gold trim plus 15 additional border colors
- Width for the Standard Bench Zone® Sideline Track Protectors is 15’ by Lengths of 75’, 100’, 125’ and 150
3G Bench Zone® Sideline Protector
- Designed to ensure heavy objects do not penetrate the fabric, while water and liquids drain through the durable material
- Easy to transport, set up, and move, plus is easy to clean
- Color options shown below
- Width for the 3G is 12’ all by Lengths of 75’, 100’, 125’ and 150’
Geo-Textile (Mirafi IR10): Non-woven geo-textile composed of polypropylene fibers, which are formed into a stable network such that the fibers retain their relative position. Weight 10.5oz./sq. yd., Thickness 90 mm, Grab Tensile Strength 260 lbs., CBR Puncture Strength 690 lbs., UV resistance (@ 500 hrs.) 80% Strength Retained.
Perimeter Vinyl: 18oz./sq. yd. fully COATED vinyl on base fabric scrim of 1,000 denier x 1,300 denier polyester. Fabric meets following tests: Tear Strength Tests: Warp 100 lbs., Fill 100 lbs., Grab Tensile Strength: Warp 410 lbs., Fill 410 lbs., Weft Insertion: 18 x 17. Vinyl compounded with UV inhibitors and mold inhibitors. Cold Crack: Minus 40 degrees F°.
Perimeter Pocket Weight: 1/4″ Hot Dipped Galvanized Grade 30 Proof Coil Chain. Material Diameter is 0.276″. Working Load Limits 1,300 lbs. Proof Load Test 2,600 lbs. Minimum Breaking Load 5,200 lbs. Inside Length 1.24″ Inside Width 0.38″ Weight Per Foot 0.63 lbs.
Standard Sizes: 7’6” or 15’ Wide x Lengths 30’, 40’, or 50’. Custom Sizes available.
Color Availability for Vinyl Border
